Ingiant radio high speed high frequency rotary joint
Ingiant radio high speed high frequency rotary joint
Feature
- Specially designed for radio frequency signal transmission, the highest frequency can reach 40GHz
- Coaxial contact design makes the connector have an ultra-wide bandwidth and no cut-off frequency
- Multi-contact structure, effectively reducing relative jitter
- The overall size is small, the connector is plugged and used, and it is easy to install
Can be customized specifications
- Rated current and voltage
- Rated rotating speed
- Operating temperature
- Number of Channels
- Housing material and color
- Dimensions
- Dedicated wire
- Wire exit direction
- Wire length
- Terminal type
Typical application
Suitable for military and civilian vehicles, radar, microwave wireless rotating platforms
High frequency/microwave coaxial rotary joint is used in the 360°continuous rotation devices to transfer DC~56GHz high frequency signals.
Apply for satellite antenna, vehicle, radar, microwave antenna test bench etc. It can be make to single-channel or multi-channels high frequency for transmission signal and datas, also support 1~2 channel DC~50GHz RF signals, communications, combine with power or other types of signal of slip ring is available, gas/liquid mixing transmission medium.
|
Main parameters |
|
| Channels | Can be customized |
| Working frequency | DC~can be customized |
| Working temperature | -40°C~+70°C or others |
| Maximum rotating speed | 0~200rpm or higher |
| Insertion loss | <1dB (There will be gaps in data in different frequency bands) |
| Insertion loss variation | <0.5dB (There will be gaps in data of different frequency bands) |
| Standing wave ratio | 1.2 (There will be gaps in data of different frequency bands) |
| Standing wave change | 0.2 (There will be gaps in data of different frequency bands) |
| Structure material | Aluminum alloy |
|
HS-1RJ-001 |
|
|
Technical parameters |
|
| Channels | Channel 1 |
| Interface type | Type-N |
| Frequency range | DC~8GHz |
| Average power | 200W |
| Maximum standing wave ratio | 1.3 |
| Standing wave ratio fluctuation value | 0.05 |
| Insertion loss | 0.4dB |
| Insertion loss variation | 0.5dB |
| Isolation | 50dB |
|
HS-1RJ-002 |
|
|
Technical parameters |
|
| Channels | Channel 1 |
| Interface type | SMA-f(50Ω) |
| Frequency range | DC~18GHz |
| Average power | 200W@1G 100W@8G 30W@18G |
| Maximum standing wave ratio | 1.4 |
| Standing wave ratio fluctuation value | 0.1 |
| Insertion loss | 0.6dB |
| Insertion loss variation | 0.1dB |
| Isolation | 50dB |
Related products
RF rotary joint & COAX slip rings
RF rotary joint & COAX slip rings
RF rotary joint & COAX slip rings
DHK034-11-2S RF conductive slip ring combination 2 channels RF + 11channels power signal
RF rotary joint & COAX slip rings
DHS075-60-1S solid shaft slip ring1channel RF rotary joint + electric combination slip ring
RF rotary joint & COAX slip rings